ON GOING SUCCESS! - CLASS 'A' CONSTRUCTION GROUT
Continued success is being experienced throughout the Pacific Islands with our heralded range of economical construction grouts. A recent order of over 8000 bags of Congrout A has just seen its 8th and final container delivered for a single resort project in Fiji. The material has been used in numerous situations to ensure success and integrity for the project and its builders.
Adjuvate Congrout A is an industry leading, high strength, shrinkage compensated Type A Grout specially designed to provide maximum strength and filling capacity in all situations. |
|
The grout is suitable for construction and repairs including applications under pre-cast panels, base plates, machine bases, concrete covings and pipe penetrations through a variety of substrates.
Congrout A represents a cost effective, pre-mixed, non shrink cementitious Type A grout that complies fully with the Australian Standard (MP20, 1977). It combines graded siliceous aggregate, special Portland cement and other chemically reactive agents. The product does not contain Calcium Chloride or Ferrous materials.
|
 |
Adjuvate Australia is working hard to increase the profile of quality Australian building products throughout the Pacific Islands and would welcome any enquiries from wholesale or retail distributors looking to strengthen their ties with Australian manufacturers. |
WATERPROOFING - SHEET MEMBRANES
| The entire ‘Master Series’ of membranes and their associated accessories are specifically designed for Australian conditions and produced under the strict guidelines of ISO9001 Total Quality Management |
|
Master Mineral PA
High quality APP membrane combining; high performance polymer bitumen, polyester / glass carrier and a mineral chip topping. This system provides a durable answer to the problems associated with flat / sloped roofs exposed to the harsh Australian environment.
10m rolls |
Master P3
APP bitumen based membrane, with a high strength polyester / glass reinforcement.
Good cold flexibility, bacteria & pollution resistance and High UV rating make this product a sensible, below grade solution for Australian conditions.
10m rolls
|
|
Master Garden P3
Polyester reinforced APP membrane with the added benefit of a root inhibiting compound. Plant roots are repelled upon contact with the membrane, making it suitable for all planter box applications as well as below grade where root damage may be expected.
10m rolls
|
Master Base V
Glass fibre reinforced membrane designed as a dimensionally stable underlayment for multi-layer systems. When utilised under Master P3, Master Mineral PA or Master Garden P3 it augments a durable solution to the demands of Australian flat roof applications.
10m rolls
|
|
Master Vent
With 14% perforation this vent sheet provides a dimensionally stable underlayment with the ability to disperse moisture in all directions. This design reduces the possibility of trapped moisture blistering, deforming or damaging the completed Master P3, Master Mineral PA or Master Garden P3 two layer system.
20m rolls
|
Accessories & Tools
Adjuvate stocks a large range of detail accessories and application tools to assist in the placement of our Master Series Systems. |
|
|
